RK-AL 2514/27 - Tipping trailer

Tipping Trailer RK-ST 2514-27.jpg
Boeckmann Hydraulic lever tipper.jpg
Boeckmann safety support.jpg
Boeckmann Pendular platform gate.jpg
Boeckmann Folding front wall.jpg
Boeckmann wall locks.jpg
Tipping Trailer RK-ST 2514-27.jpg
Boeckmann Hydraulic lever tipper.jpg
Boeckmann safety support.jpg
Boeckmann Pendular platform gate.jpg
Boeckmann Folding front wall.jpg
Boeckmann wall locks.jpg

RK-AL 2514/27 - Tipping trailer

5,500.00

With compact dimensions - 2560mm length and 1400mm width - this backwards tipper trailer is very easy to handle, even in narrow lanes. Alumnium sidewalls, solid steel profile bridge, pendular platform gate and screen printed floor reinforced with galvanised sheet steel for extreme localised loads.

$5,500+GST

2560mm long x 1400mm wide, 1.5t

Add to Wishlist

Specifications

  • Axles: 1
  • Tow rating: 1.5t
  • Weight: 485kg
  • Payload: 1,015kg
  • Interior dimensions: 2560mm long x 1400mm wide x 300mm high (side walls)
  • Loading height: 665mm
  • Chassis: Hot-dipped galvanised steel
  • Structure: Hot-dipped galvanised steel & aluminium

Standard equipment

  • Overrun brakes
  • Maintance-free rubber axle (with individual wheel suspension)
  • Aluminium sidewalls (hot-dipped galvanised, foladable with cast hinges)
  • Galvanised steel sheet on wisedeck floor
  • Corner steel posts (hot-dipped galvanised steel, removable)
  • Swinging rear gate (with elevated corner steel posts for large opening height)
  • Hydraulic tipping with security support (with large hydraulic telescopic cylinder)
  • V-draw bar
  • Jockey wheel
  • Solid cast coupling
  • Lashing bars/shackles with spring (rattle-free, maximum traction force 250kg)
  • Stainless steel bolts on structure
  • Screwed axle supports
  • Screwed longitudinal beams
  • Screwed cross members
  • Impact resistant, recyclable plastic mud guards
  • 12" wheels

Options

  • Wheel shock absorbers (2)
  • Automatic jockey wheel
  • Electronic-hydraulic pump (with battery (12V/88H) and emergency hand pump)
  • Battery charger
  • Sidewall gallery (sides, hot-dipped galvanised steel)
  • Ladder rack (front wall)
  • Flat canvas top (with bracket)
  • Container net
  • Spare wheel & holder
  • Retaining cable at dropdown rear wall
  • Aluminium drive-on ramps (per pair, 2,000x220mm, 300kg capacity per rail)
  • Aluminium drive-on ramps (per pair, 2,410x250mm, 1,350kg capacity per rail)
  • Brackets for rails (on left and right sidewalls)
  • Telescopic crank drop legs (pair)
  • Additional lashing rings
  • Lockable plastic storage case (440x150x210mm)